Granville work days 3/1-3/2
Re: Granville work days 3/1-3/2
I'm a noob. Where is Granville? Don't know how far of a trip it is.
Stephen (not Steve) - '20 Husky 701LR / KTM '20 500 EXC / '17 150 XC-W / '21 E-XC / '21 890R / '19 Sherco 300FST / Sur-Ron LBX / Segway X160 / Sur-Ron Ultra Bee
Re: Granville work days 3/1-3/2
You should ask Granville about that. The location is revealed only to inmates and is not published online.
I can say It's about 30 min from Cumberland, MD.
Can anyone answer about the bikes - do we take our bikes with us or not?
Every day is a good day when you ride
Re: Granville work days 3/1-3/2
Of course take your bike. Work, then play
(with Big Jim's blessing )
Bruce
Re: Granville work days 3/1-3/2
That's the answer I was hoping for
Every day is a good day when you ride
Re: Granville work days 3/1-3/2
OK, so it's private land. Will do. Cumberland is a good enough general area. That's only about 2 hrs from here. Thanks.
Stephen (not Steve) - '20 Husky 701LR / KTM '20 500 EXC / '17 150 XC-W / '21 E-XC / '21 890R / '19 Sherco 300FST / Sur-Ron LBX / Segway X160 / Sur-Ron Ultra Bee
Re: Granville work days 3/1-3/2
Every day is a good day when you ride
Re: Granville work days 3/1-3/2
Its well worth the drive. Such an awesome place. I'm working that weekend. I honestly feel like a bit of a jerk not coming out to help. I've been there quite a few times over the years.
Yamaha WR250R
Yamaha TW200
Surron UltraBee
Yamaha TW200
Surron UltraBee
Re: Granville work days 3/1-3/2
PM sent to Granville. Have chainsaws, will travel :)
The two most important days in your life are the day you were born and the day you figure out why. - Mark Twain
Re: Granville work days 3/1-3/2
Anyone bringing a quad that could haul a couple saws / tools?
I will have my pack with saw and plan to ride to where clearing is needed....far to much trail to cover on foot.
As others have said, one saw to 2 guys pitching works well. A good trail hand saw will have most smaller limbs cut and gone in time it takes to unpack and start a saw. Not my first rodeo doing trail clearing.
Jim sounds like you have a small army coming...if you want to add some fresh single track just hang some ribbons and cut us loose. Sounds like an epic day.
I will have my pack with saw and plan to ride to where clearing is needed....far to much trail to cover on foot.
As others have said, one saw to 2 guys pitching works well. A good trail hand saw will have most smaller limbs cut and gone in time it takes to unpack and start a saw. Not my first rodeo doing trail clearing.
Jim sounds like you have a small army coming...if you want to add some fresh single track just hang some ribbons and cut us loose. Sounds like an epic day.
2022 TRS 300 E-start
2021 Beta 300rr
2021 Beta 300rr