A fuel/oil thread

DAMN maintenance and repair thread; including Farkle Fests! :boohoo:
Post Reply
User avatar
juddspaintballs
DAMN Grand Poohba
Posts: 1754
Joined: Wed Nov 14, 2012 8:32 am
Contact:

A fuel/oil thread

Post by juddspaintballs » Fri Dec 26, 2014 12:10 pm

So I have to start mixing 2 stroke fuel now for my KTM and I've never had to do it before for a bike. I already have the required ratio and I think I've also determined what brand of oil to buy. My question is this: ethanol free 87 gasoline or hi-test with 10% ethanol gasoline? I know most of my bikes liked running on high octane better. Another option is the ethanol free stuff with octane boost mixed in. What say you DAMN guys?
Jed Gregory
1090 Adventure R

User avatar
thetable
DAMN Expert
Posts: 361
Joined: Wed Jan 29, 2014 7:33 am
Contact:

Re: A fuel/oil thread

Post by thetable » Fri Dec 26, 2014 12:38 pm

Gore Grocery, 93 no likker. It's harder to just dump premix in another vehicle, so shelf life is important, and that is the major downfall of the corn squeezin' fuel.

Taylor
DAMN Expert
Posts: 397
Joined: Mon Apr 04, 2011 7:40 pm
Contact:

Re: A fuel/oil thread

Post by Taylor » Fri Dec 26, 2014 3:20 pm

87 ethanol free will work fine and is what I used for years an never had any issues. I also never tossed it if I didn't use it up right away, just shake it up real well to mix it back up. Now with the ethanol crap they call gas after a week I put it in my mower. ( makes the yard smell nice)
2012 Husky WR 125
2009 Husky TE 310
2001 Harley FLHR

User avatar
Bucho
DAMN Admin
Posts: 6546
Joined: Sat Mar 08, 2008 10:57 am
Contact:

Re: A fuel/oil thread

Post by Bucho » Fri Dec 26, 2014 3:36 pm

I tend to use the higher octane fuel from the pump. Ive had it sit for at least two months in my premix jug with out any ill effect that I could tell.
Once or twice Ive had it sit longer and I dumped it into my car fuel tank.
Yamaha WR250R
Yamaha TW200

User avatar
juddspaintballs
DAMN Grand Poohba
Posts: 1754
Joined: Wed Nov 14, 2012 8:32 am
Contact:

Re: A fuel/oil thread

Post by juddspaintballs » Fri Dec 26, 2014 4:11 pm

Thanks for the tip on Gore Grocery! It's not too far out of the way when I'm in Winchester so I can swing buy and pick up 10 gals at a time.
Jed Gregory
1090 Adventure R

User avatar
Laoch
DAMN Admin
Posts: 3823
Joined: Sat Mar 08, 2008 11:51 am
Contact:

Re: A fuel/oil thread

Post by Laoch » Fri Dec 26, 2014 5:17 pm

For my 4t, 2t, chainsaw, weed thingy, snowblower, mower, ATV, genny, etc, etc, I use regular pump gas.
I mix in some Sta-Bil ethanol stuff and then mix with oil if needed. It never sits long and I never have issues.

On mixing, I'm not a stickler, 40/50:1 works fine. I think some folks over analyze everything.
I do tend to use synthetic 2t mixing oil.
Bruce

User avatar
Bucho
DAMN Admin
Posts: 6546
Joined: Sat Mar 08, 2008 10:57 am
Contact:

Re: A fuel/oil thread

Post by Bucho » Fri Dec 26, 2014 6:15 pm

60:1
Yamaha WR250R
Yamaha TW200

User avatar
J&J
DAMN Grand Poohba
Posts: 1003
Joined: Sat Jan 05, 2013 10:54 pm
Contact:

Re: A fuel/oil thread

Post by J&J » Fri Dec 26, 2014 6:33 pm

I use Amsoil 100 to 1 in all small engines, chain saws, weedeaters, ect. regardless of manufacturers recommendations. Has worked well for me for years.......

On a 2 stroke bike I would use there Dominator oil at 50 to 1.
I'm inclined to think the ratio depends on the oil quality. Run the carburator dry if it's going to sit. Ethanol free if you can get it. Just my 2 cents.

BillyGoat
DAMN Expert
Posts: 389
Joined: Fri Feb 25, 2011 12:01 pm
Contact:

Re: A fuel/oil thread

Post by BillyGoat » Fri Dec 26, 2014 6:59 pm

My my power equipment, the premix oil comes with fuel stabilizer....doesn't the dirtbike oils have fuel stabilizer included?
KTM 450 EXC mostly
Member AMA, PaTRA, MD OHV Alliance, trying to join R&T

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 15 guests