I was unable get the old avatars reimported. Regretfully, you will have to upload your avatar again. Please report any issues here,.
Spokes
Spokes
Can I reuse spokes? I am going to get some powder coating done on a sumo wheel. Any opinions?
Re: Spokes
I say you can re-use spokes. But I don't approve of powder coating wheels.
DRZ S and SM
Vertemati SM
KTM 520 EXC
Vertemati SM
KTM 520 EXC
Re: Spokes
Added un-sprung weight got you down? Try the new Fadkins Diet for slimmer, trimmer rims!
The hexes on spoke nipples, which are often brass, are quite fragile. Personally, I'd order a complete set of nipples from Buchannans, they can't cost that much. If you opt for stainless spoke nipples, and have stainless spokes (quite probable), you must put anti-seize on the threads before assembly or the threads will gall.
http://www.buchananspokes.com/product.htm
You could get yourself a set of bitchin' chrome-plated twisted spokes.
The hexes on spoke nipples, which are often brass, are quite fragile. Personally, I'd order a complete set of nipples from Buchannans, they can't cost that much. If you opt for stainless spoke nipples, and have stainless spokes (quite probable), you must put anti-seize on the threads before assembly or the threads will gall.
http://www.buchananspokes.com/product.htm
You could get yourself a set of bitchin' chrome-plated twisted spokes.
Re: Spokes
all this talk of nipples is...
Ken
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Re: Spokes
.....
- Attachments
-
- hard_nipples.jpg (212.49 KiB) Viewed 3756 times
DRZ S and SM
Vertemati SM
KTM 520 EXC
Vertemati SM
KTM 520 EXC
Re: Spokes
I was wondering about the powdercoating of rims? Why not recommended? I just want a black rim.
Re: Spokes
spokes are fine to re use but they do stretch and wear out, the bucannon is the shit, sending the whole wheel to them is the best deal but not with a trashed rim
not sure why else but the powder coating can chip durring mounting and can't be repaired resulting in ugly. Better off with plain rims or just bying a black excell. my black excells got marked up from changing tires and riding too, they were pretty.
not sure why else but the powder coating can chip durring mounting and can't be repaired resulting in ugly. Better off with plain rims or just bying a black excell. my black excells got marked up from changing tires and riding too, they were pretty.
Re: Spokes
Nothing wrong with powder coating. I prefer the look and durability of anodizing, personally.restukey wrote:I was wondering about the powdercoating of rims? Why not recommended? I just want a black rim.
DRZ S and SM
Vertemati SM
KTM 520 EXC
Vertemati SM
KTM 520 EXC
Re: Spokes
I am just worried about the anodizing fading really quick. I had it happen on the ducati, and I am not sure why?