Page 1 of 2

Machine Shop Recommendation?

Posted: Tue Aug 11, 2015 3:13 pm
by BigBird
I live in Frederick (Braddock Heights) and just need a steering stem pressed out of a triple clamp, turned down to a smaller diameter and pressed back in place.

Looking for recommendation on where to take it.

THANKS!

OFG

Re: Machine Shop Recommendation?

Posted: Tue Aug 11, 2015 3:32 pm
by Rut Row
call Curtis at Full Circle V-Twin in Hagerstown. (240) 347-4663

Tell him I sent ya.

Re: Machine Shop Recommendation?

Posted: Tue Aug 11, 2015 5:34 pm
by B00ST00
X2 for Curtis


Sent from my iPhone using Tapatalk

Re: Machine Shop Recommendation?

Posted: Tue Aug 11, 2015 6:21 pm
by BigBird
I had one excellent result with Curtis. BUT the last time is was pretty much a disaster. He took a month to do a one or two hour job even after I told him I REALLY needed it in a few days (2 weeks into the month) and sort of refused to answer my inquiries as to what was happening. etc. So I need to go somewhere else.

Re: Machine Shop Recommendation?

Posted: Tue Aug 11, 2015 8:34 pm
by Rut Row
BigBird wrote:I had one excellent result with Curtis. BUT the last time is was pretty much a disaster. He took a month to do a one or two hour job even after I told him I REALLY needed it in a few days (2 weeks into the month) and sort of refused to answer my inquiries as to what was happening. etc. So I need to go somewhere else.
I had a similar experience several years ago. I thought he was reformed. Hopefully that was an exception.

Re: Machine Shop Recommendation?

Posted: Tue Aug 11, 2015 8:43 pm
by anotherguy
Bill Coleman Linthicum MD. A bit of a drive for you but he will do a good job and not burn you on cost. 410-799-2906 I've known Bill since I was a kid and he's always been busy so if you're in a hurry he may not be your guy. Nicest guy you'll ever meet.

Re: Machine Shop Recommendation?

Posted: Wed Aug 12, 2015 1:04 pm
by Skinny-J
anotherguy wrote:Bill Coleman Linthicum MD. A bit of a drive for you but he will do a good job and not burn you on cost. 410-799-2906 I've known Bill since I was a kid and he's always been busy so if you're in a hurry he may not be your guy. Nicest guy you'll ever meet.
A buddy of mine tells me all kinds of stories from when he used to work at Coleman Brother Speed Shop; I think Bill was one of the owners. From the stories, it was a pretty fun place to work....

Re: Machine Shop Recommendation?

Posted: Wed Aug 12, 2015 1:27 pm
by trialsrider
Skinny-J wrote:
anotherguy wrote:Bill Coleman Linthicum MD. A bit of a drive for you but he will do a good job and not burn you on cost. 410-799-2906 I've known Bill since I was a kid and he's always been busy so if you're in a hurry he may not be your guy. Nicest guy you'll ever meet.
A buddy of mine tells me all kinds of stories from when he used to work at Coleman Brother Speed Shop; I think Bill was one of the owners. From the stories, it was a pretty fun place to work....
Man that was a great place. I spent many my days in my youth there.


Sent from my iPhone using Tapatalk

Re: Machine Shop Recommendation?

Posted: Wed Aug 12, 2015 2:36 pm
by Rut Row
I have a lathe but no press.

Re: Machine Shop Recommendation?

Posted: Wed Aug 12, 2015 3:06 pm
by Skinny-J
trialsrider wrote:
Man that was a great place. I spent many my days in my youth there.
Wow, small world. Did you know a counter-guy named Tom Lenhoff? That's my buddy...