Page 4 of 4

Re: Why I don't work on carbs

Posted: Thu Jun 04, 2015 9:43 am
by anotherguy
The blue needle in the JD kit is a half step richer than the red. The colors indicate hot/cold.

Re: Why I don't work on carbs

Posted: Fri Jun 05, 2015 7:09 pm
by Wingfixer
Then it must be the blue needle I put in....they say that memory is the third thing to go...

Re: Why I don't work on carbs

Posted: Sun Jun 07, 2015 9:54 am
by Laoch
Today's challenge ....


Image

Re: Why I don't work on carbs

Posted: Sun Jun 07, 2015 12:24 pm
by Laoch
Easy, peasy. Starts and runs. WFO test later :deal:

Re: Why I don't work on carbs

Posted: Mon Jun 08, 2015 10:02 am
by anotherguy
Yeah a JD kitted FCR is as close to EFI you can get. Throttle response is surprising.

Re: Why I don't work on carbs

Posted: Mon Jun 08, 2015 1:15 pm
by Laoch
Runs much better at higher rpm's and is a bit more snappy.

Now to fix the stator issue :frustrated:

Re: Why I don't work on carbs

Posted: Wed Oct 07, 2015 2:41 pm
by Marylander
Related to the JIS screwdrivers Motion Pro now has some JIS bits in their product line up: 08-0576 (JIS 1), 08-0577 (JIS 2), and 08-0578 (JIS 3) plus a T handle set with 3 bits 08-0557. I've got screwdrivers but don't carry them on the bike. The bits will be better since they don't add much bulk and I already carry a bit driver.

http://www.motionpro.com/search?q=JIS+cross+head

Re: Why I don't work on carbs

Posted: Wed Oct 07, 2015 5:21 pm
by Laoch
I recently took carb off of my IT175 apart ...ooops :lol2:

Luckily I have two and I think I'm good. Start and run test later.