I was unable get the old avatars reimported. Regretfully, you will have to upload your avatar again. Please report any issues here,.

Why I don't work on carbs

DAMN maintenance and repair thread; including Farkle Fests! :boohoo:
User avatar
anotherguy
DAMN Expert
Posts: 439
Joined: Thu Sep 01, 2011 7:04 am
Contact:

Re: Why I don't work on carbs

Post by anotherguy »

The blue needle in the JD kit is a half step richer than the red. The colors indicate hot/cold.
User avatar
Wingfixer
aka FlatFixer
Posts: 4012
Joined: Tue Nov 18, 2008 4:20 pm
Contact:

Re: Why I don't work on carbs

Post by Wingfixer »

Then it must be the blue needle I put in....they say that memory is the third thing to go...
F*** work.
Ride motorcycles.
User avatar
Laoch
DAMN Admin
Posts: 3823
Joined: Sat Mar 08, 2008 11:51 am
Contact:

Re: Why I don't work on carbs

Post by Laoch »

Today's challenge ....


Image
Bruce
User avatar
Laoch
DAMN Admin
Posts: 3823
Joined: Sat Mar 08, 2008 11:51 am
Contact:

Re: Why I don't work on carbs

Post by Laoch »

Easy, peasy. Starts and runs. WFO test later :deal:
Bruce
User avatar
anotherguy
DAMN Expert
Posts: 439
Joined: Thu Sep 01, 2011 7:04 am
Contact:

Re: Why I don't work on carbs

Post by anotherguy »

Yeah a JD kitted FCR is as close to EFI you can get. Throttle response is surprising.
User avatar
Laoch
DAMN Admin
Posts: 3823
Joined: Sat Mar 08, 2008 11:51 am
Contact:

Re: Why I don't work on carbs

Post by Laoch »

Runs much better at higher rpm's and is a bit more snappy.

Now to fix the stator issue :frustrated:
Bruce
User avatar
Marylander
DAMN Admin
Posts: 1428
Joined: Wed Oct 16, 2013 8:13 pm
Contact:

Re: Why I don't work on carbs

Post by Marylander »

Related to the JIS screwdrivers Motion Pro now has some JIS bits in their product line up: 08-0576 (JIS 1), 08-0577 (JIS 2), and 08-0578 (JIS 3) plus a T handle set with 3 bits 08-0557. I've got screwdrivers but don't carry them on the bike. The bits will be better since they don't add much bulk and I already carry a bit driver.

http://www.motionpro.com/search?q=JIS+cross+head
User avatar
Laoch
DAMN Admin
Posts: 3823
Joined: Sat Mar 08, 2008 11:51 am
Contact:

Re: Why I don't work on carbs

Post by Laoch »

I recently took carb off of my IT175 apart ...ooops :lol2:

Luckily I have two and I think I'm good. Start and run test later.
Bruce
Post Reply