I need one of these taps Saturday and don't know any place locally to buy one. It is a much finer thread than standard.
Anyone know where I might find one? Or anyone with a high end metric tap set that might have one I can rent or borrow???
I was unable get the old avatars reimported. Regretfully, you will have to upload your avatar again. Please report any issues here,.
8mm X 0.75 Tap - Need one Satruday
8mm X 0.75 Tap - Need one Satruday
Sam Jones - Frederick MD
GL1800 DCT TRIO Tilting Trike - KTM 525 EXC - KTM 200 XCW - 2 KTM Freeride 250Rs - TRS 300 Xtrack Trials
Lots of E-Bikes/MCs
Polaris RZR 800
Lots of MTBs and Road Bikes and a BamBuk Recumbant Tandem Trike eBike
GL1800 DCT TRIO Tilting Trike - KTM 525 EXC - KTM 200 XCW - 2 KTM Freeride 250Rs - TRS 300 Xtrack Trials
Lots of E-Bikes/MCs
Polaris RZR 800
Lots of MTBs and Road Bikes and a BamBuk Recumbant Tandem Trike eBike
Re: 8mm X 0.75 Tap - Need one Satruday
I have a set of metric taps. After I've had a lot more coffee I'll walk out and check.
Ken
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Re: 8mm X 0.75 Tap - Need one Satruday
Try calling your local NAPA store, if they don't have it ask them to check the computer to see if a different NAPA in a town close by might have it.
Sounds like a brake fitting thread and they should carry tools for that
Sounds like a brake fitting thread and they should carry tools for that
2022 TRS 300 E-start
2021 Beta 300rr
2021 Beta 300rr
Re: 8mm X 0.75 Tap - Need one Satruday
M8-1.50 is standard.
mine is a M8-1.00 (spiral flute too, cuts fast but wasn't cheep!)
mine is a M8-1.00 (spiral flute too, cuts fast but wasn't cheep!)
Ken
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
- Longboardr
- DAMN Expert
- Posts: 314
- Joined: Sun Mar 11, 2012 7:27 am
- Contact:
Re: 8mm X 0.75 Tap - Need one Satruday
Did you find one? I can bring one to Boom Boom's if you can use it there.
Re: 8mm X 0.75 Tap - Need one Satruday
No but THANKS!
I redesigned the mod I was doing so I didn't need it.
See you tomorrow![Ride! :rickey:](./images/smilies/ricky.gif)
I redesigned the mod I was doing so I didn't need it.
See you tomorrow
![Ride! :rickey:](./images/smilies/ricky.gif)
Sam Jones - Frederick MD
GL1800 DCT TRIO Tilting Trike - KTM 525 EXC - KTM 200 XCW - 2 KTM Freeride 250Rs - TRS 300 Xtrack Trials
Lots of E-Bikes/MCs
Polaris RZR 800
Lots of MTBs and Road Bikes and a BamBuk Recumbant Tandem Trike eBike
GL1800 DCT TRIO Tilting Trike - KTM 525 EXC - KTM 200 XCW - 2 KTM Freeride 250Rs - TRS 300 Xtrack Trials
Lots of E-Bikes/MCs
Polaris RZR 800
Lots of MTBs and Road Bikes and a BamBuk Recumbant Tandem Trike eBike