I need one of these taps Saturday and don't know any place locally to buy one. It is a much finer thread than standard.
Anyone know where I might find one? Or anyone with a high end metric tap set that might have one I can rent or borrow???
I have been having problems with the server running out of resources and giving errors. It is better but I'm still getting some periodically. Please report any you get to me at ken@kyler.com.
8mm X 0.75 Tap - Need one Satruday
8mm X 0.75 Tap - Need one Satruday
Sam Jones - Frederick MD
GL1800 DCT TRIO Tilting Trike - KTM 525 EXC - KTM 200 XCW - 2 KTM Freeride 250Rs - TRS 300 Xtrack Trials
Lots of E-Bikes/MCs
Polaris RZR 800
Lots of MTBs and Road Bikes and a BamBuk Recumbant Tandem Trike eBike
GL1800 DCT TRIO Tilting Trike - KTM 525 EXC - KTM 200 XCW - 2 KTM Freeride 250Rs - TRS 300 Xtrack Trials
Lots of E-Bikes/MCs
Polaris RZR 800
Lots of MTBs and Road Bikes and a BamBuk Recumbant Tandem Trike eBike
Re: 8mm X 0.75 Tap - Need one Satruday
I have a set of metric taps. After I've had a lot more coffee I'll walk out and check.
Ken
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Re: 8mm X 0.75 Tap - Need one Satruday
Try calling your local NAPA store, if they don't have it ask them to check the computer to see if a different NAPA in a town close by might have it.
Sounds like a brake fitting thread and they should carry tools for that
Sounds like a brake fitting thread and they should carry tools for that
2022 TRS 300 E-start
2021 Beta 300rr
2021 Beta 300rr
Re: 8mm X 0.75 Tap - Need one Satruday
M8-1.50 is standard.
mine is a M8-1.00 (spiral flute too, cuts fast but wasn't cheep!)
mine is a M8-1.00 (spiral flute too, cuts fast but wasn't cheep!)
Ken
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
- Longboardr
- DAMN Expert
- Posts: 314
- Joined: Sun Mar 11, 2012 7:27 am
- Contact:
Re: 8mm X 0.75 Tap - Need one Satruday
Did you find one? I can bring one to Boom Boom's if you can use it there.
Re: 8mm X 0.75 Tap - Need one Satruday
No but THANKS!
I redesigned the mod I was doing so I didn't need it.
See you tomorrow
I redesigned the mod I was doing so I didn't need it.
See you tomorrow
Sam Jones - Frederick MD
GL1800 DCT TRIO Tilting Trike - KTM 525 EXC - KTM 200 XCW - 2 KTM Freeride 250Rs - TRS 300 Xtrack Trials
Lots of E-Bikes/MCs
Polaris RZR 800
Lots of MTBs and Road Bikes and a BamBuk Recumbant Tandem Trike eBike
GL1800 DCT TRIO Tilting Trike - KTM 525 EXC - KTM 200 XCW - 2 KTM Freeride 250Rs - TRS 300 Xtrack Trials
Lots of E-Bikes/MCs
Polaris RZR 800
Lots of MTBs and Road Bikes and a BamBuk Recumbant Tandem Trike eBike
Who is online
Users browsing this forum: No registered users and 3 guests