I was unable get the old avatars reimported. Regretfully, you will have to upload your avatar again. Please report any issues here,.

Snapped Key

DAMN maintenance and repair thread; including Farkle Fests! :boohoo:
User avatar
Bucho
DAMN Admin
Posts: 6537
Joined: Sat Mar 08, 2008 10:57 am
Contact:

Snapped Key

Post by Bucho »

The locking gas cap on my Kawasaki Concours was sticking real bad last time I gassed up. So bad it bent my key a little bit to turn the lock and open it. So I thought I would get it opened here at home. Take a look at it and clean it up a bit.

However, I snapped my key off in the gas lock. Nothing to grab w/ fingers or needlenose plies to pull it out.

I think its the only key I have. (if I ever did have a spare key, I can't remember what I did w/ it.)

Any thoughts?
Yamaha WR250R
Yamaha TW200
User avatar
Rut Row
Benevolent Dictator
Posts: 9755
Joined: Sat Mar 08, 2008 3:39 am
Contact:

Re: Snapped Key

Post by Rut Row »

try a dab of superglue on the end of a metal rod/clothes hanger/etc
Ken
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
Taylor
DAMN Expert
Posts: 397
Joined: Mon Apr 04, 2011 7:40 pm
Contact:

Re: Snapped Key

Post by Taylor »

Call a locksmith? :shrug:
2012 Husky WR 125
2009 Husky TE 310
2001 Harley FLHR
User avatar
Rut Row
Benevolent Dictator
Posts: 9755
Joined: Sat Mar 08, 2008 3:39 am
Contact:

Re: Snapped Key

Post by Rut Row »

get a new bike? :harhar:
Ken
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
User avatar
Longboardr
DAMN Expert
Posts: 314
Joined: Sun Mar 11, 2012 7:27 am
Contact:

Re: Snapped Key

Post by Longboardr »

Turn the bike upside down and shake it :dry:

A blast of WD40 would likely loosen up the lock. If it had happened on my FZ1 I'd stick what's left of the key in the lock and get the cap open. There's a couple of screws on the underside of the cap that hold the lock assembly in the cap. I'd pull out the assembly and go to a locksmith with it.
User avatar
BigBird
DAMN Grand Poohba
Posts: 1149
Joined: Mon Mar 08, 2010 10:33 pm
Contact:

Re: Snapped Key

Post by BigBird »

How about using an acetelene torch to burn a hole in the gas cap so you can get it off? :harhar:
Sam Jones - Frederick MD
GL1800 DCT TRIO Tilting Trike - KTM 525 EXC - KTM 200 XCW - 2 KTM Freeride 250Rs - TRS 300 Xtrack Trials
Lots of E-Bikes/MCs
Polaris RZR 800
Lots of MTBs and Road Bikes and a BamBuk Recumbant Tandem Trike eBike
BillyGoat
DAMN Expert
Posts: 389
Joined: Fri Feb 25, 2011 12:01 pm
Contact:

Re: Snapped Key

Post by BillyGoat »

Buy a new gas cap and get a key cut?
KTM 450 EXC mostly
Member AMA, PaTRA, MD OHV Alliance, trying to join R&T
Ovo
DAMN Poohba
Posts: 840
Joined: Mon Jun 14, 2010 8:13 pm
Contact:

Re: Snapped Key

Post by Ovo »

Those are some really creative answers....I would stick with buy a new bike, primarily my 09 Concours...you dont have a key, so you dont have to worry about that happening again.
14 Tiger800 XCX
09 Husaberg 450 FE
07 Suzuki DRZ400S
User avatar
Rut Row
Benevolent Dictator
Posts: 9755
Joined: Sat Mar 08, 2008 3:39 am
Contact:

Re: Snapped Key

Post by Rut Row »

other creative answers:
- buy a new tank
- drill a new hole and fill through that (add a cork to keep the crud out)
Ken
Die young as late as possible, remember who you were before the world told you how it should be. -- Barry Morris
BillyGoat
DAMN Expert
Posts: 389
Joined: Fri Feb 25, 2011 12:01 pm
Contact:

Re: Snapped Key

Post by BillyGoat »

You forgot about "convert it to coal power" however, the downside is the coal bin that you'd have to add and the shoveling while riding that you'd have to do.
KTM 450 EXC mostly
Member AMA, PaTRA, MD OHV Alliance, trying to join R&T
Post Reply