I was unable get the old avatars reimported. Regretfully, you will have to upload your avatar again. Please report any issues here,.

DS Ride 10/14 Michaux

Want to go for a DAMN Ride? So do we! :whoop:
User avatar
aai
DAMN Poohba
Posts: 553
Joined: Tue Oct 01, 2019 2:05 pm
Contact:

Re: DS Ride 10/14 Michaux

Post by aai »

Hi SM, The only person I know so far that’s hooked up a wide band or doing dynos is that YouTube guy ktm/husky. According to his findings the map is a little richer over the ‘19s and he just did a Dyno on a 2020 stock. They are putting out approx 4hp over the 500 ktm/huskys from the year before. Apparently it’s because they raised the compression and richen it some. 10/4 on the tuner regardless, I understand JD jetting just released theirs couple weeks ago.



Sent from my iPhone using Tapatalk Pro
Beta Evo Sport 300 4T "running crisp again thanks to Jtrobb"
KTM 150 XCW tpi
KTM 890 ADV R
GASGAS EX 450F
smdub
DAMN Poohba
Posts: 938
Joined: Thu Oct 11, 2018 2:21 pm
Contact:

Re: DS Ride 10/14 Michaux

Post by smdub »

Typical dyno run says nothing about anything other than WOT. Almost no one (except the factory) does dyno pulls at 1/16 or 1/8 throttle. Adjusting all the part throttle maps/jetting is where great throttle response comes from. The XC/XCW should have this much more correctly dialed in from the factory than the EXCs (sorry, can't remember all the Husky equivant names.)
Stephen (not Steve) - '20 Husky 701LR / KTM '20 500 EXC / '17 150 XC-W / '21 E-XC / '21 890R / '19 Sherco 300FST / Sur-Ron LBX / Segway X160 / Sur-Ron Ultra Bee
User avatar
aai
DAMN Poohba
Posts: 553
Joined: Tue Oct 01, 2019 2:05 pm
Contact:

Re: DS Ride 10/14 Michaux

Post by aai »

good point. Ive had 5 flame outs since ownership, thankfully not in do or die moments. I think John already ordered his, vortex. Im leaning toward JD
https://jdjetting.com/product/jdhqx14-h ... -fe501-20/
Beta Evo Sport 300 4T "running crisp again thanks to Jtrobb"
KTM 150 XCW tpi
KTM 890 ADV R
GASGAS EX 450F
Post Reply